48mm mikuni - 51mm CV
#1
48mm mikuni - 51mm CV
Does anyone know if the spigot on a 48mm Mikuni is the same as the 51mm Screamin eagle CV as the only manifold available from ULtima is for the 48mm.
I have a 127" ultima with the 45mm but would like to try the 51mm on itas I have it laying around but would need a manifold.
I have a 127" ultima with the 45mm but would like to try the 51mm on itas I have it laying around but would need a manifold.
#2
51mm
Does anyone know if the spigot on a 48mm Mikuni is the same as the 51mm Screamin eagle CV as the only manifold available from ULtima is for the 48mm.
I have a 127" ultima with the 45mm but would like to try the 51mm on itas I have it laying around but would need a manifold.
I have a 127" ultima with the 45mm but would like to try the 51mm on itas I have it laying around but would need a manifold.
#3
#4
The following 2 users liked this post by rizzo:
eighteight (04-30-2021),
mike131 (04-30-2021)
#5
#6
#7
The following 2 users liked this post by Mattbastard:
mike131 (05-02-2021),
monckywrench (05-01-2021)
Thread
Thread Starter
Forum
Replies
Last Post