Perfromance Heads for TC88
#1
Perfromance Heads for TC88
I have a '06 fuel injected Street Glide. The only perfromance mods to date is the S.E. Air Kit w/new SE round cover, V&H Classic Slip-ons and PCIII.
I want to add cams/heads before spring.I do not see a whols lot of complete heads for sale or a tuned cam/Head package anywhere. Interested in bottom end/mid range power/torque as I do not burn alot of miles at 5500 RPM.....
Who does the best head work and is there a tuned head/cam package available? I will send heads out for work if needed, but kinda surprised I cannot any aftermarkets available.
I want to add cams/heads before spring.I do not see a whols lot of complete heads for sale or a tuned cam/Head package anywhere. Interested in bottom end/mid range power/torque as I do not burn alot of miles at 5500 RPM.....
Who does the best head work and is there a tuned head/cam package available? I will send heads out for work if needed, but kinda surprised I cannot any aftermarkets available.
#2
RE: Perfromance Heads for TC88
There are a lot of kits out there. I am running the HeadQuarters top end and it is a very good setup and the work is flawless. Go here:
http://www.head-quarters-usa.com/
Others have selected to go with :
http://www.gmrperformance.com/
and there are others. Kuryakin, R&R, Hillside, and a lot of others. Look through the engine tech section and you will find all kinds of info.
http://www.head-quarters-usa.com/
Others have selected to go with :
http://www.gmrperformance.com/
and there are others. Kuryakin, R&R, Hillside, and a lot of others. Look through the engine tech section and you will find all kinds of info.
#4
RE: Perfromance Heads for TC88
I had GMR do a budget $275 job on mine and am very happy. The 06 heads do not take a lot and Steve is very quick on the turn around at least he was with mine. If you are interested in bottom/mid range torq you have him do your heads and a set of 26 cams and you will be smiling.
#5
RE: Perfromance Heads for TC88
thers tons of heads out there check ebay bunch of sets.One guy who does great head work Is tman performance.Its shop few mile away.Hes good cant say his attitude is something Im grazy about but he does do good head work and had completekits that will make a honest 105 to 110 hp on the dyno.
Thread
Thread Starter
Forum
Replies
Last Post
CNC WHEEL GUY
Touring Models
17
08-09-2009 09:20 AM