got a problem, coughing threw intake
#1
got a problem, coughing threw intake
here is a video of what my bike is doing, I know it is a tune problem, or atleast it started right after my tune. bike is a 09 streetbob, python staggered duals, bct qq baffles, heavy breather, 54h cams, adj push rods, 30t pulley, pcv tuner, and some other odds and ends. what is your thoughts? fyi seems to get worse the hotter it is outside, and stops anything above 2800 to wot. It is getting retuned saturday.
#5
back track..
I am not a mechanic, but i just came across your post, when i do work on my ride, and i am having problems that were not there before,,i try to take a step back and see at what point the bike starts to get back to normal and then fine out what part is responsible making the bike have coughing,,good luck and post when you find out the problem// thanks ryd,,
#7
Trending Topics
#9
I see your from Missouri.
Gails H-D, in Grandview, Missouri, will ACE your tune for you.
Ask for Robin if you go there.
Scott
Gails H-D, in Grandview, Missouri, will ACE your tune for you.
Ask for Robin if you go there.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#10
wish I would have know that first!! the guy at blue springs harley is tuning it there, so hopefully it will be right in a couple hours. BUT when my pocket is full enough for my Hillside plans............gails it is!!!
Thread
Thread Starter
Forum
Replies
Last Post
stackovrflo
Sportster Models
10
04-04-2012 09:51 AM