I've just finished installing Andrews 48 cams in my 2007 street bob. I'm running a TTS tuner. If anyone else is running that combination, and would like to send me a map to use as a starting point, I'd greatly appreciate it.

Thanks

Crazy

 

check over at harley tech talk, theres a guy over there who used the tts and went way over the top in getting his setup dialed. Lots of great info on his thread. He would probably give you his map to start your setup

 

You should be able to make a good starting calibration selection from the included base cals. Make sure you run the software updater and have the most current updates, and follow the standard criteria for selecting your base map:

1.) Year and model
2.) Cams
3.) Heads
4.) Exhaust

Not really enough in your original post to go on, but presuming stock heads it looks like you might want to start with maybe CAA176-03? You should be able to use the Cam Estimator to adjust the cam event timing for the 48's, and be pretty close for starters?

Roger

 

Take Tunaman's advice. Go to the TTS site and download the software updater; it will show all the calibration files that are available for download. Find one that looks close; there may be files for the 48 but a file for the 255 should be close enough as well.

Doc has created a VTune for Dummies PDF; take advantage of the VTune feature and tune it yourself. You can search for "VTune for Dummies" and the file should turn up somewhere. If not, PM me with an email address and I will send you Doc's manual.

 

Thanks for the advise, everyone.

 

I second that. He's got the tuning thing down. Go check it out...