raking front end
#1
raking front end
doing a front end change and taking any tips or warnings
Wanted at least a small rake for my 05 Sporty XLC and am trying a combo to give myself 8 degrees round about
have a 3 degree cup rake kit and a 5 degree triple tree rake kit. have 2 in over fork extensions and 1 inch lower kit for back of bike
The handling part is something of concern of course and have ran this combo thru the caluculaters and shows not too bad. I gonna start tear down within a week and kind of curious what I can expect or if I may want to drop the fork extensions or any advice
Wanted at least a small rake for my 05 Sporty XLC and am trying a combo to give myself 8 degrees round about
have a 3 degree cup rake kit and a 5 degree triple tree rake kit. have 2 in over fork extensions and 1 inch lower kit for back of bike
The handling part is something of concern of course and have ran this combo thru the caluculaters and shows not too bad. I gonna start tear down within a week and kind of curious what I can expect or if I may want to drop the fork extensions or any advice
#2
#3
Check the trail. The rake will increase the trail. Also lowering the back will increase the trail as well. If you get too much trail the front wheel will wobble and be very unstable. An analogy is the caster on a shopping cart, when you push a shopping cart too fast the wheels go crazy.
Anyway, geometry is important. Take a good read on this site for ideas....
http://www.chopper-kit-usa.com/index.htm
I was asking about raking as well. Here's the thread with some good replies...
https://www.hdforums.com/forum/gener...tire-kits.html
Anyway, geometry is important. Take a good read on this site for ideas....
http://www.chopper-kit-usa.com/index.htm
I was asking about raking as well. Here's the thread with some good replies...
https://www.hdforums.com/forum/gener...tire-kits.html
Last edited by zeus33; 12-04-2009 at 12:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Rich Train Driver
Frame/Suspension/Front End/Brakes
16
03-24-2007 04:15 PM