Electrical Connection On '14 Road King
#1
Electrical Connection On '14 Road King
So, I've finally gotten around to posting this question for some of you that might be able to answer it.
ON the right side of my bike, in the triple tree area, there's an unused connector of some sort. I'm thinking it might be part of the harness that's not used since the bike doesn't have a fairing and all of the doodads that come with one. I put a meter on it, and it's hot when the ignition is on, whether or not the toggle switch for the accessory power is on.
Anybody know what it's for?
Also, that bracket - anybody know what that's all about?
Thanks in advance!
ON the right side of my bike, in the triple tree area, there's an unused connector of some sort. I'm thinking it might be part of the harness that's not used since the bike doesn't have a fairing and all of the doodads that come with one. I put a meter on it, and it's hot when the ignition is on, whether or not the toggle switch for the accessory power is on.
Anybody know what it's for?
Also, that bracket - anybody know what that's all about?
Thanks in advance!
#2
According to Figure 7-101, page 7-75 of the service manual, it looks like the front Wheel Speed Sensor on Road Kings w/ ABS and the plastic bracket is the Brake Line Retainer for the ABS lines.
Thread
Thread Starter
Forum
Replies
Last Post
Brytam
General Harley Davidson Chat
45
10-28-2015 07:41 PM
Jrindagame
General Topics/Tech Tips
0
04-24-2014 07:12 PM