TTS-100 camshaft
#1
TTS-100 camshaft
I ride 2 up and pulling a trailer a lot. I have been e-mailing with Steve at Fullsac and when I told him how I ride he suggested a new cam for me that is suppose to be a torque monster, the TTS-100. I have seen some dyno sheets in other places and I like what I see for how I ride, but I can't find where to get a set of them; can anyone help with where to find the TTS-100 cams?
#4
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 147,601
Received 47,790 Likes
on
18,560 Posts
255's are great torque cams ( for H.D. cams ) but many report warm/hot cranking troubles ... would recommend compression releases if you don't already have them ... FWIW
#5
I'm sure Steve would, but I felt like I had already bothered him enough. I was doing my own research looking for dyno sheets and others opinions and just thought I would ask here first. I have been to TTS power tune site and there is nothing on the site about the cams and I have emailed them twice with no response as of yet. Any help would be appreciated.
Last edited by p38ftd; 04-01-2015 at 08:41 PM.
#6
Join Date: Nov 2012
Location: South Central Pennylvania
Posts: 867
Likes: 0
Received 15 Likes
on
13 Posts
I believe that you can only order them by calling TTS direct at 310-669-8101. This is their operation in Compton, CA. and they open at 0800 Pacific time. The nice lady who answers the phone will take your order.
#7
Go on the Tri Glide/Freewheeler site. Lots of info on the TTS Cams. Mr. Wizard can tell you where you can order them! From everyting I've read, they sound great for a TG.
Trending Topics
#8
Thanks so much for all the help everyone. This is what I like about the HD community; if you have a problem or just a question there is always someone out there willing to help.
#9
254e better than 255...same low end, more mid & top, and no hot start or heat issues. I've heard it's what the 255 shoulda been. I love mine.
Thread
Thread Starter
Forum
Replies
Last Post