Hi guys. I am looking at upgrading my 2011 FLHR with the S&S Stage 6 Kit

http://www.rolliesspeedshop.com/products/stage-6-power-kit/

http://www.sscycle.com/go-fast-showcase/motorcycle-engine-kits/98-and-107-big-bore-kits

I currently have a V &H Propipe, Ventilator AC and a SEPST. Just wondering if you good folks have any feedback on this kit. I am not too keen on the S&S 630 cam and would probably go for the S&S 583.

Any advice or thoughts would be appreciated.

 

Heads, pistons and cams = stage 6 ? What am I missing?

 

I got the big bore kit and dyno'd at 118, at the time no one called it stage 6

 

I don't know much about this kit, but i know a 107 is awesome. I just did the fuel moto 107 with level b heads, new exhaust, and woods cams with 575 lift. I am happy with it, more then enough power, feels and sounds great plus their customer service cannot be beat. Don't know what brought you to the kit your looking at, but i would also look at fuel moto. I could not be happier with the product and their customer service. Either way with a good build, its awesome, i wouldn't go back.

 

I did my 107 upgrade 2 years ago and I am still smiling everytime I twist the throttle.

 

Hi guys. I have a mate who has done the big bore 107 and the 583 cam in a Breakout. He is still in the run in phase. The shop I am going to send it to (Bagger Tricks in Port Kennedy Western Australia -check them out on facebook. My mate Josh's Breakout is in a couple of the vid clips) have done a few of them though they are all just been run in. I was hoping to get the opinion of guys that may have done this and run it in already.

 

Stg 6 is new to me.. we have 1-2-3-4,, but not 5-6 ....

Stg 4 here usually means a fully built engine with a Blower and or nitrous added..????..

 

I never heard of a stage 6! It must be a whole new engine

 

My Huysong has a Stage 7