Road King Pinstripe Position Opinions?
#1
Road King Pinstripe Position Opinions?
Last night I took some vinyl line tape out and began messing around with finding a decent line for some potential pinstriping. I figured I would start with a line running the majority of the length of the bike first and look at the fenders at a later date.
What do you folks think of the tape line I ran from tank to bag? I will probably run either a single red pinstripe or red & grey parallel stripes.
What do you folks think of the tape line I ran from tank to bag? I will probably run either a single red pinstripe or red & grey parallel stripes.
#2
Well , you asked, so here goes, IF you were cutting the colors i half with a pin stripe, THAT might work, BUT ( for me) just a single OR double pin strpe, along those lines, would look awkward( again TO ME) BUT that Said, ITS YOUR BIKE do what pleases YOU. WHO am i, ( or we) to say what you'll like.
#5
i'd lose the vinyl and look for a good striper at the next rally that comes to town...theyll make your bike look like something you really want and give it a bit of a personal touch depending on your tastes...
otherwise...its your bike...have a ball with it...
otherwise...its your bike...have a ball with it...
#6
You could post a good, sharp, complete pic of your bike in the photoshopping forum here and ask for some ideas. Some of the folks there might try some ideas on it.
Photoshopping here:
https://www.hdforums.com/forum/the-p...ping-place-85/
Photoshopping here:
https://www.hdforums.com/forum/the-p...ping-place-85/
#7
Well, the vinyl tape is just there for a visual guideline. It will be removed and not the final product.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post