Analog Speedo/Tach directions
#1
Analog Speedo/Tach directions
I can't for the life of me find the directions. Can someone tell me how to change the time on this thing or lead me to a manual for it? I looked on the HD website...nothing.
Thanks....
Thanks....
#3
Speedo/Tach time set....
Not sure which unit you have but here is the way it works on my combo:
Turn Ign switch to ACC, speedo will light up.
Click trip reset button until it displays the time.
Press and hold reset - display will blink "12H" (std) or "24H" (military). Click reset once to switch from one to the other.
Press and hold reset on prefered reading - "12H" or "24H" will stay lit and "hours" will start to blink.
Click reset until correct "hour" is displayed, then press and hold reset - "hour" will stay lit and "minutes" will start to blink.
Click reset until correct "minutes" is displayed, then press and hold reset - "minutes" will stay lit, the "am" or "pm" will blink if you selected "12H" at the beginning.
Click reset to switch from "am" to "pm", then press and hold reset on correct setting - "am" or "pm" will stay lit.
Verify the correct time, then turn Ign switch off - you're done!
Hope that helps.
~
Turn Ign switch to ACC, speedo will light up.
Click trip reset button until it displays the time.
Press and hold reset - display will blink "12H" (std) or "24H" (military). Click reset once to switch from one to the other.
Press and hold reset on prefered reading - "12H" or "24H" will stay lit and "hours" will start to blink.
Click reset until correct "hour" is displayed, then press and hold reset - "hour" will stay lit and "minutes" will start to blink.
Click reset until correct "minutes" is displayed, then press and hold reset - "minutes" will stay lit, the "am" or "pm" will blink if you selected "12H" at the beginning.
Click reset to switch from "am" to "pm", then press and hold reset on correct setting - "am" or "pm" will stay lit.
Verify the correct time, then turn Ign switch off - you're done!
Hope that helps.
~
Last edited by O-Town D; 04-01-2013 at 02:43 AM. Reason: more info
Thread
Thread Starter
Forum
Replies
Last Post