General Harley Davidson Chat Forum to discuss general Harley Davidson issues, topics, and experiences.
Sponsored by:
Sponsored by:

Starting issues

Thread Tools
 
Search this Thread
 
  #1  
Old 05-25-2014, 07:38 PM
tmultra's Avatar
tmultra
tmultra is offline
Road Warrior
Thread Starter
Join Date: Aug 2009
Location: USA
Posts: 1,287
Received 593 Likes on 190 Posts
Default Starting issues

A buddy of mine has a street glide and when he his the starter all he gets is clicking. Assumed it was the battery because it was six years old. Put a new one in and still just getting the clicking. Any ideas?
 
  #2  
Old 05-25-2014, 07:40 PM
dawg's Avatar
dawg
dawg is offline
Seasoned HDF Member
Join Date: Jun 2006
Location: Vermont
Posts: 26,438
Received 2,945 Likes on 1,705 Posts
Default

Starter relay? A victim of the service bulletin on big twin starter fasteners?
 
  #3  
Old 05-25-2014, 08:55 PM
nevil's Avatar
nevil
nevil is offline
Seasoned HDF Member
Join Date: Jul 2008
Location: southeast PA
Posts: 9,009
Received 968 Likes on 731 Posts
Default

Make sure the battery and ground cables are all clean and tight.
 
  #4  
Old 05-25-2014, 09:22 PM
revfredmorton's Avatar
revfredmorton
revfredmorton is offline
Advanced
Join Date: May 2014
Location: United States
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds like a starter issue.
 
  #5  
Old 05-26-2014, 08:44 AM
oldairboater's Avatar
oldairboater
oldairboater is offline
Ultimate HDF Member
Join Date: Jan 2008
Location: Republic of Texas
Posts: 7,476
Likes: 0
Received 2 Likes on 2 Posts
Default

This is an easy fix. Could be anything from starter, to solenoid, to cables loose or dirty back to battery with a switch in between somewhere. Don't assume that anything is right without checking, cleaning and tightening till you get to the starter. Even it can be checked several different ways. I am always amazed when people ask this question. Follow the voltage is like following water in a pipe. Glad I grew up working on junk.
 
  #6  
Old 05-26-2014, 09:25 AM
cHarley's Avatar
cHarley
cHarley is offline
Club Member
Join Date: Feb 2007
Location: Boynton Beach, FloriDuh
Posts: 16,320
Received 299 Likes on 228 Posts
Default

The first place to begin with a clicking starter issue is to measure your battery voltage (to the 1/10th of a volt) both at rest, and again with the start button pressed.
 
  #7  
Old 05-26-2014, 10:18 AM
rjb71's Avatar
rjb71
rjb71 is offline
6th Gear
Join Date: May 2013
Location: Stony Plain, Alberta, Canada
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Use a digital volt meter and check for voltage drops between every connection.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
58hack45
General Topics/Tech Tips
5
11-02-2015 02:54 PM
Wampa Stomper
Shovelhead
5
09-26-2015 06:58 PM
IMG2
Ignition/Tuner/ECM/Fuel Injection
0
03-26-2012 06:54 PM
radio915
Ignition/Tuner/ECM/Fuel Injection
20
04-15-2011 08:58 PM
wfbailey06
Softail Models
0
09-10-2010 01:54 PM



Quick Reply: Starting issues



All times are GMT -5. The time now is 02:40 PM.