California engine builder
#1
California engine builder
New to California, Ft Irwin. Looking for a quality engine builder to do a 107" kit on my SG. Want to do a fuel moto but I really don't have time to ride out there for them to do it.
#3
A little bit of a drive but C&E Auburn V-Twin would help you get this done.
Carlos built my 108" shovel and is a legend when it comes to fast motorcycles.... AHDRA champion back in the day
It's about 3.5 hours from your location
Carlos built my 108" shovel and is a legend when it comes to fast motorcycles.... AHDRA champion back in the day
It's about 3.5 hours from your location
#4
There are plenty of engine builders in the Valley but not too many close to where you are.
Binfords in Manteca has a good reputation and has been there a long time.
Three dogs Custom Cycles in Bakersfield also has been there a while.
Niether CARB (nor anyone else for that matter) cares about customizers and builders, they chase the big money and go after importers and manufacturers. Also, motorcycle shops are required to be registered with the Bureau of Auto Repair. You can find any disciplinary history on them here.
http://www.bar.ca.gov/70_sitewideinf...fylicense.html
Good plug for C&E V-Twin also. Carlos and Emma were the original Harley dealer in the area and took over the business back over when Auburn Harley closed..
Binfords in Manteca has a good reputation and has been there a long time.
Three dogs Custom Cycles in Bakersfield also has been there a while.
Niether CARB (nor anyone else for that matter) cares about customizers and builders, they chase the big money and go after importers and manufacturers. Also, motorcycle shops are required to be registered with the Bureau of Auto Repair. You can find any disciplinary history on them here.
http://www.bar.ca.gov/70_sitewideinf...fylicense.html
Good plug for C&E V-Twin also. Carlos and Emma were the original Harley dealer in the area and took over the business back over when Auburn Harley closed..
Last edited by dribble; 06-20-2014 at 10:15 AM.
#5
The ride doesn't bother me, might check them out. Also heard about Chris Revis out in Fresno. Heard some good things coming out of there.
#7
Earl Burly up in Ridgecrest is just up the road from you. Can't say enough good things about the guy and he knows how to make serious power. Old AHDRA champ that's been building motors for years. Only about 1-1.5 hours up the road from yah.
Thread
Thread Starter
Forum
Replies
Last Post