Evo air cleaner cover on a twin cam
#1
Evo air cleaner cover on a twin cam
I've always liked the stock Evo air cleaner covers, with the brushed aluminum trim rings. I have a new Deluxe with the stock football cover, but I'm going to be installing the SE stage 1 air cleaner for the twin cam and was wondering if an Evo air cleaner cover would fit over it (assuming I can find a used one in good condition or NOS). I can't remember if the Evo cover is 7" or 8" in diameter, or if it even matters. Anyone know if this will work?
edit: If I use an Evo cover I will be tossing the trim ring, since obviously it won't be appropriate for my bike. There are other trim rings to fit it.
edit: If I use an Evo cover I will be tossing the trim ring, since obviously it won't be appropriate for my bike. There are other trim rings to fit it.
Last edited by High Roller; 12-16-2014 at 12:30 PM.
#2
#3
I've always liked the stock Evo air cleaner covers, with the brushed aluminum trim rings. I have a new Deluxe with the stock football cover, but I'm going to be installing the SE stage 1 air cleaner for the twin cam and was wondering if an Evo air cleaner cover would fit over it (assuming I can find a used one in good condition or NOS). I can't remember if the Evo cover is 7" or 8" in diameter, or if it even matters. Anyone know if this will work?
edit: If I use an Evo cover I will be tossing the trim ring, since obviously it won't be appropriate for my bike. There are other trim rings to fit it.
edit: If I use an Evo cover I will be tossing the trim ring, since obviously it won't be appropriate for my bike. There are other trim rings to fit it.
Must have done that for our clients 30-40 times.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
Thread
Thread Starter
Forum
Replies
Last Post