I have an 03 Dyna Low Rider with a 95" big bore and fairly mild 37g gear cams. I'm looking for a Screamin Eagle part number for a race ignition that retards the timing like 5 degrees at wot and has a Rev of 6200 ish. Anyone have this info for something similar?

 

32720-99 this is the part number that went bad. I don't need 7000 rpm Rev limit.6000 or just over would be fine, but it ran great with the 7000 rpm one. Not sure if they make a lower rpm one that retards the timing. Really hoping someone on here would be knowledgeable on this. Thanks guys!

 

Check my response in your other thread and click the ebay link.
31778-01A is the part you want.
But like I said in the other thread better of going aftermarket.
I put a link there for that as well.
Might pay to actually read all the respones on your other thread before starting a new one.

 

Might have to go aftermarket for one. Does this look like it would fit your needs


http://www.dynaonline.com/skins/prod...n/dyna_2000TC/

 

Here's a newer version of the one you have. https://dallas.craigslist.org/mdf/mpo/4902658793.html

 

Thanks Lt1 for your info. Yes scotty, I read all of my post replies....including yours. the cdi on Ebay was priced too high. The only reason I reposted was to be more direct in my question. Thanks everyone for your replies! I responded to the CL ad for $45. See what happens.

 

thanks Lt1! That was the only one I could find on Craigslist as well! I bought it for $45. Is this a plug n play deal? it shouldn't trigger an idiot light should it??