'06 Dyna FXDCI starting problem - everything went dead
#1
'06 Dyna FXDCI starting problem - everything went dead
Here is my situation:
Battery was dead so I re-charged it.
Turned the key to start and all lights came on as usual.
Pressed the button to crank it and after 3 or 4 cranks, all power was gone. Lights and everything went off.
Checked the battery and still had a full charge, but nothing works.
Any ideas on the problem and/or where I should look first?
Battery was dead so I re-charged it.
Turned the key to start and all lights came on as usual.
Pressed the button to crank it and after 3 or 4 cranks, all power was gone. Lights and everything went off.
Checked the battery and still had a full charge, but nothing works.
Any ideas on the problem and/or where I should look first?
#4
#6
#7
Trending Topics
#8
Originally Posted by BDYNAED
you must be bored but thanks for the info
First thing I would do would be to make sure all my battery connections, including the ones at the starter and frame ground were good, then get the battery load tested at an AutoZone or somewhere similar. If you're using a voltmeter it won't tell you how your battery performs under load. Need to measure cranking amps.
Good luck and let us know how you make out.
Jim
Last edited by roussfam; 11-20-2020 at 09:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post