After coming off hwy for approx 30 to 40 mins the bike died for no reason.Would only restart once on berm of road after shutting ignition off,then turning ign switch back on. Anyone have this happen?and what was the cure?The bike is an 07 SG.It died while still rolling.

 

Knock on wood...this has never happened to me. My first peek would be on the ECM connections then over to the coil.

 

The cure should be a phone call to the dealer. Come pick up my new bike that quit running and call me after you fix it.....................BG

 

It happened on way back form dealer.They had it for two days for primary noise.I was just trying to get off hwy ramp before someone nailed me.Bike will hold fault for 50 starts.Im going back next week for rep trouble shooting.

 

Are you sure you want to rely on YOUR dealer?
You can read the trouble codes yourself without clearing them.

See this link https://www.hdforums.com/m_327240/tm.htm.

 

Thanks for the link.I want my dealer and HD to see what kinda bike they sold me.Im going in for primary noise again come oct.Im sick of running back to my dealer all the time.Loading them up with acouple items works better for me.

 

I would read the codes myself and make a note of them before taking the bike in.

When you take it in for service see if they come up with the same codes. It would be a way of checking if they are just BS.

 

I agree.

 

Had a friends bike stall on a ride with us the other day--wouldnt restart . This was after about a hour riding. Found code , I think it was po373 intermittmwnt crank sensor ---Installed new sensor and problems hasnt re-ocurred. I agree with RoadGlide07, read your codes . Good luck on your bike. Haver a great day.
TOOLBOX

 

My problem (07 Ultra) was similar, not identical - after long run the engine just died, would restart and run if throttle feathered while hot, would run fine when "cold" appears to be the Idle Control Sensor (based on diagnostic codes).