Go Back   Harley Davidson Forums > Harley Davidson Tech & Mechanical Forum > Ignition/Tuner/ECM/Fuel Injection
Sign in using an external account
Register Forgot Password?
Search


Ignition/Tuner/ECM/Fuel Injection Need advice on ignition issues? Questions about a tuner? Have questions about a EFI calibration or Fuel Injection? Tips on Engine Diagnostics, how to get codes, and what they mean. Find your answers here.
Sponsored by: Cardo Systems

Reply
 
 
 
P
 
Thread Tools Search this Thread
  #1  
Old 10-03-2006, 08:48 PM
NitroBerserker's Avatar
NitroBerserker NitroBerserker is offline
Senior Rider
Join Date: Jun 2006
Location: Pittsburgh PA
Posts: 481
Default 2001 FLHTC radio problem

OK my radio quit. lights still on, clock still keeps time, when you turn on the igniton it makes the normal clicks but will not power up. and I can't change the clock time. BTW its a cassette not a CD.
I've tried disconnecting the battery ( just lost the time ) pulling the fuses, they are good, i've tried accessing the diagnostics mode and it shows a 11011 code but I don't know what that means. aslo you cannot navigate in the diagnostic mode but when you push the preset buttons some of the numbers in the code change from 1 to 0 (binary I guess) WHAT does it all mean, any clues out there?
__________________
If Some is Good, More is Better and Too Much is Just Right!

Climbing Pikes Peak
http://i55.photobucket.com/albums/g1...urgis07165.jpg
Reply With Quote
  #2  
Old 10-03-2006, 09:03 PM
Shovelhead Bob Shovelhead Bob is offline
Outstanding HDF Member
Join Date: Apr 2006
Posts: 2,537
Default RE: 2001 FLHTC radio problem

You are killin' me.....

The 11011 that you see is the diagnostic mode #1, and those are the toggle actions 1- stationary 0- switch/button active or pressed.....

There are 4 or 5 diagnostic modes for the Radio Sound unit....

You cycle through them with the soft keys (Radio buttons [Seek/Scan/DX, etc)...

Off the top of my head I can't remember the cycle (Pony Tail is too tight right now...)

Definitely helps to have an Electrical Diagnostics Manual right about now.....

Too bad it didn't happen at the shop.... Coulda hooked it right up than and there....

Reply With Quote
  #3  
Old 10-03-2006, 09:21 PM
NitroBerserker's Avatar
NitroBerserker NitroBerserker is offline
Senior Rider
Join Date: Jun 2006
Location: Pittsburgh PA
Posts: 481
Default RE: 2001 FLHTC radio problem

Well if thats the case it must think one of the buttons is still pressed, No thats not it I just tried them all and they all make one of the numbers change. it did this about a week ago, quit that is, then just fixed itself ? I should have known then it would come back to haunt me.
__________________
If Some is Good, More is Better and Too Much is Just Right!

Climbing Pikes Peak
http://i55.photobucket.com/albums/g1...urgis07165.jpg
Reply With Quote
  #4  
Old 10-05-2006, 12:44 AM
One_Screamin_Eagle One_Screamin_Eagle is offline
Join Date: Jul 2006
Location:
Posts: 866
Default RE: 2001 FLHTC radio problem

Any recent work in the switch housings? Many times a pinched wire will do that. All the #'s should be 1's to start in that test mode.
Reply With Quote
  #5  
Old 09-27-2008, 05:44 PM
rick302 rick302 is offline
Hang Around
Join Date: Dec 2007
Location:
Posts: 25
Default Same problem with radio on 02' FLHTCI.

1st week of June had dealer install cruise control. Replaced right hand switch assembly.
2nd week of June radio died. No power on/off. Mode switch gave same codes you got.
Took bike to different dealer, Harley said ECM was bad. Replaced ECM, approx. $500.00.
ECM wasm't the fix, but dealer said it was reporting codes & needed replacement anyway.
Dealer replaced right side handelbar controls saying it had a strafed wire shorting out on the Mode Switch. Radio appeared ok after that fix. A few days later I tried to switch bands. Nothing happened. Radio turned on/off, volumn worked, changed channels ok, but would not change bands. I now have a ghost in electronics. Most of the time radio works except changing bands, however intermittently I turn the bike on and the radio comes on, the volumn does not work, it won't change channels, & won't turn off. Turn bike off/on & problem disappears. This has happened about 4 times. Dealer says when it happens again bring it in. They have no idea!
Rick
Reply With Quote
  #6  
Old 10-01-2008, 08:20 PM
Electra1 Electra1 is offline
One Of The Regulars
Join Date: Jun 2008
Location: South Dakota
Posts: 129
Default

I had this same problem with my 2001 FLHTCUI. I found that one or 2 buttons on the handle bar controls were stuck. Dirt and water, I think corroded the contacts that the buttons push on. Once I cleaned around each button on the handle bar controls the radio worked fine. Give it a try.
Electra 1
__________________
Freedom isn't free!
Reply With Quote
Old 10-01-2008, 08:20 PM
 
 
 
P
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Self-Diagnostics for Harman Kardon radios Harleypingman Touring Models 207 09-30-2014 06:39 PM
Bus er comes up on odometer superfxr Ignition/Tuner/ECM/Fuel Injection 0 08-31-2014 08:43 AM
Fuelpak and/or ECM problem Deuce55 Ignition/Tuner/ECM/Fuel Injection 10 08-22-2014 01:10 PM
Harley Davidson, Code Master, HD P/N 32312-10 Bluehighways Multi-Fit Parts and Accessories 1 03-12-2012 01:59 AM
Need Help Diagnosing Harmon Kardon Radio Intermittent Problem 2black1s Audio Systems 6 11-02-2011 01:19 PM


Tags
11011, 2001, cassette, code, davidson, diagnostic, flhtci, harley, mean, mode, problem, problems, radio, volumn, work


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Join HDForums

Advertising
Featured Sponsors
Vendor Directory
Sponsors

All times are GMT -5. The time now is 09:12 PM.


Internet Brands, Inc.