I need info. I have 2102 street glide with a se super tuner, vh high output exhaust. I just install se 211 cams in my bike.i want to know do I have to reprogram tuner or download a new map my bike is running like crap.

 

You can try doing a few ST runs and see if it changes the VE tables more than 5%, if it does do some more runs until they are within 5% of your saved setting. If that doesn't help you'll have to reload a stage 2 map and do the ST runs again. RTFM

 

If you changed out the cams,,, then you need to flash a Stage 1 Map that includes the SE211 Cams, then start your Smart Tune runs to dial it in...

 

Sam? No such thing as a Stage 1 with cams. In Harley talk, that then becomes a Stage2 automatically.

OP? You need a new calibration and will have to smart tune all over again. Cams make a huge difference in how a bike breathes. Do not just continue with the old Stage 1 calibration.

Maybe start off with 044SDF004. That calibration will be as close to 211s you can get.

May also wish to try 044SDH004.

 

Thanks I finally got in touch with my tuner he said its stage 2 also taking it in tomorrow for new download and to have it tweaked.