SOLD........Guys
I picked up this top end in a large parts lot I bought
Everything came of an 06 SG
Low Miles,around 10k
All in Perfect condition
The cross hatch looks excellent on the jugs
If you want better pics just ask

Everything is as it cam off bike,I have Not cleaned anything up yet,but I plan to as I have time

Pair of HTCC,CNC ported heads
Matching HTCC pistons
Pair or 95"Jugs
This set up ran excellent, and performed very well using a Fat Cat 2\1
And A Thunder max auto tune

I'm asking $400 For everything plus $30 Shipping or pick up in the Asheville,NC Area

I will consider trade for a AFR+,used Thunder max tuner, complete Enforcer front wheel setup
Or bike Audio stuff,06 through 08 street glide fenders
Here are the specs on the heads






B. SCREAMIN’ EAGLE PRO
TWIN CAM PORTED “HTCC” HEADS**
These heads have been updated with ’06 intake flange geometry, and will accommodate the Screamin’ Eagle Pro 50mm EFI Induction Module. Kit includes revised intake flanges, intake seals and required hardware. This head is for serious performance engine builders, and is the highest-flowing cylinder head vailable from Screamin’ Eagle. This high-flow CNC ported version of our popular “HTCC” head has a 2.0" intake valve, 1.623" exhaust valve, an 84cc combustion chamber volume, and ports designed to produce big horsepower. This head is fitted with valve springs capable of withstanding .650" lift and
revs up to 7,000 RPM. Use with Screamin’ Eagle Intake Manifold P/N 29635-99. Heads are machined to accept Compression Release Kit P/N 32076-04. For race application only. Fits ’99-later Twin Cam models equipped with Big-Bore Cylinders. EFI models require ECM recalibration through applicable calibration cartridge or through EFI Race Tuner Kit. See EFI Race Tuner Kit for fitment or calibration matrix for possible applications.
16925-02B Black Highlighted. $1,399.95
16934-02B Silver Highlighted. $1,299.95

I m thinking it's just a little more than I need for my cruiser..lol

 

Any idea on compression, or the can profile needed to match the heads?

 

I wanna say I read 10.5 to 1
But not 100%
Not sure on cam
Original owner was running a mild cam
Se204

 

First $300 plus actual shipping gets it

 

I've been asked to separate the set
I guess I will
Heads.. $235 shipped
Jugs $125 shipped
I'm Not set up for Pay pal...sorry
I do accept postal Money orders
Personal checks are fine also,but will Not ship till it clears
Have feedback and can provide references from this forum

 

Will this work on an '06 88" dyna? When I look on line they say up to '05.

 

Yes it will

 

pm sent

 

Theads,pistons jugs are in Awesome condition
Scott over at Hillside does some some good work with them also
..Although they are ready to go as is!

 

Theads,pistons jugs are in Awesome condition
Scott over at Hillside does some some good work with them also
..Although they are ready to go as is!
I've have not had a chance to even clean them up yet,I will get them done this weekend

Oh also,these already have the manual comp releases installed!