2014-2023 Touring Models This Section Is For Rushmore/2014-2023 Touring Models
Sponsored by:
Sponsored by:

Screamin' Eagle Pro Stage III Kit for Twin-Cooled 103 Engines

Thread Tools
 
Search this Thread
 
  #1  
Old 11-21-2014, 06:56 PM
erno0610's Avatar
erno0610
erno0610 is offline
Intermediate
Thread Starter
Join Date: Jul 2011
Location: Naperville, IL
Posts: 28
Received 0 Likes on 0 Posts
Default Screamin' Eagle Pro Stage III Kit for Twin-Cooled 103 Engines

Did the Screamin' Eagle Pro Stage III Kit for Twin-Cooled 103 Engines. It's a brand new kit that just came out. Also went with new pipes and Reinhart Sleeves and a sweat Screamin' Eagle Air Cleaner. DynoJet was run before and after the mods. Here are the results:



Increased HP by 35.7 (74.41 to 110.11) and increased torque by 27 (93.78 to 120.78). Pretty happy with the results. Now I just have to wait until spring to ride!
 
  #2  
Old 11-21-2014, 07:14 PM
motoguy82's Avatar
motoguy82
motoguy82 is offline
Advanced
Join Date: Jun 2014
Location: Missouri
Posts: 88
Received 7 Likes on 7 Posts
Default

Damn nice improvement. I can't find much info on the kit. What does it bump compression to?
 
  #3  
Old 11-21-2014, 07:17 PM
erno0610's Avatar
erno0610
erno0610 is offline
Intermediate
Thread Starter
Join Date: Jul 2011
Location: Naperville, IL
Posts: 28
Received 0 Likes on 0 Posts
Default

Originally Posted by motoguy82
Damn nice improvement. I can't find much info on the kit. What does it bump compression to?
Here's the kit - it's new so it doesn't show up anywhere but the new catalog...



Compression goes to 11.25:1
 
  #4  
Old 11-21-2014, 07:39 PM
motoguy82's Avatar
motoguy82
motoguy82 is offline
Advanced
Join Date: Jun 2014
Location: Missouri
Posts: 88
Received 7 Likes on 7 Posts
Default

Thanks for the reply. What octane do you need to run in that thing now?! Mine was detonating slightly on 91 octane, so I run 93 all the time now.
 
  #5  
Old 11-21-2014, 08:16 PM
erno0610's Avatar
erno0610
erno0610 is offline
Intermediate
Thread Starter
Join Date: Jul 2011
Location: Naperville, IL
Posts: 28
Received 0 Likes on 0 Posts
Default

Originally Posted by motoguy82
Thanks for the reply. What octane do you need to run in that thing now?! Mine was detonating slightly on 91 octane, so I run 93 all the time now.
I'm in the Chicago area and I always run 93. If it's less I add octane booster. The bike is put up for the winter at the dealer. This spring when the weather gets warmer, they'll fine tune it. It's a 2014 Ultra Limited. Once I add the heated seat it's essentially a CVO Limited for about $8K less.

It currently has 9,300 miles so I'm just around the corner from the 10,000 mile check up. I'm looking to go over 20K by the end of the 2015 riding season. Can't wait for spring!
 
  #6  
Old 11-22-2014, 10:08 AM
plongson's Avatar
plongson
plongson is offline
Road Master
Join Date: Jun 2008
Location: Southern Utah, USA
Posts: 1,148
Received 326 Likes on 151 Posts
Default

Looked up the kit and found it bumps the compression to 11.25:1
 
  #7  
Old 11-22-2014, 10:36 AM
scottt's Avatar
scottt
scottt is offline
Outstanding HDF Member
Join Date: Sep 2006
Location: Northern California
Posts: 2,878
Received 164 Likes on 104 Posts
Default

Is this a street legal, warranty approved upgrade like the stage four kit is?

IMHO, we are starting to see performance upgrades that the water cooled exh. valve helps make possible. While maintaining reliability.
 
  #8  
Old 11-22-2014, 01:36 PM
FLYER's Avatar
FLYER
FLYER is offline
Road Master
Join Date: Aug 2008
Location: Portland, Oregon
Posts: 751
Received 9 Likes on 8 Posts
Default

Was your bike Dyno tuned or was that a canned map in the super tuner? Very impressive, I think I want to do this myself
 
  #9  
Old 11-22-2014, 08:54 PM
erno0610's Avatar
erno0610
erno0610 is offline
Intermediate
Thread Starter
Join Date: Jul 2011
Location: Naperville, IL
Posts: 28
Received 0 Likes on 0 Posts
Default

Originally Posted by scottt
Is this a street legal, warranty approved upgrade like the stage four kit is?

IMHO, we are starting to see performance upgrades that the water cooled exh. valve helps make possible. While maintaining reliability.
It's street legal. I've read that any of this type of work "voids the warranty". I discussed this with the dealer. It's where I bought the bike and where I had the kit installed. There comment was that they (the dealer) still honor the warranty since they did the work. If it would have been done by an independent shop, then not so much.
 
  #10  
Old 11-22-2014, 08:56 PM
erno0610's Avatar
erno0610
erno0610 is offline
Intermediate
Thread Starter
Join Date: Jul 2011
Location: Naperville, IL
Posts: 28
Received 0 Likes on 0 Posts
Default

Originally Posted by FLYER
Was your bike Dyno tuned or was that a canned map in the super tuner? Very impressive, I think I want to do this myself
It was dyno tuned both before and after the work. I was surprised twice - first that the HP was so low originally, and then pleasantly surprised that it was so high after the upgrade. I was told it would come in between 100 and 103 HP. But then again, it's a brand new kit and the dealer was pleasantly surprised by the results as well.
 


Quick Reply: Screamin' Eagle Pro Stage III Kit for Twin-Cooled 103 Engines



All times are GMT -5. The time now is 04:06 PM.