Just installed the stuff in the title. Wow. Super bright. I feel a little safer already. Anybody who's seen the LED display at the dealership will be hard pressed not to make it happen!

Straightforward install, just read the directions thoroughly and it's cake. Well, unless you have very limited tools, in which case those blinker allen bolts will be an exercise in extreme patience and willpower. Lol. I used an Allen wrench that had a flat cut, don't be that guy (it took forever). Recommending the kind of allen wrench with the rounded end or better yet, a ratcheting wrench and Allen bit.

One more tip is the top Allen bolt on the blinkers can be left with a few full rotations then slid down once the bottom one is removed.

 

Wax on

 

Wax off, lol

 

Sorry I'm not long enough to grab one with the brakes on, solo style. And I wasn't smart enough to take a shot of the original setup before I began the install for a comparison

 

HD offers a modulator unit to flash the rear brakelights of a Rushmore bike ?

What is the part number?

thank you

 

In written out copy paste friendly format:
(Harley Davidson part #)

68000123A

 

Runs 74.95

And is true plug and play. Pull the seat> unplug the rear most harness> plug the modulator in between> zip tie the pack> reinstall seat =

RUN/BRAKE/TURN SIGNAL ECSTASY

 

Thank you

 

Check to make sure it works with your model. The 2015 road king has been an anomaly to get stuff for according to the parts guy and a few issues we have run into

Welcome