extended saddlebags and scraping?
#1
#4
I'm expecting delivery on a complete rear end kit from Bad Dad for my '14 streetglide and interested in this topic. I saw their skid plates and have been looking for some feedback on all the skid plates out there in general and not just the Bad Dad ones. Anyone leaned hard into a turn and found them useful? Doesn't the footpeg hit before the saddlebag?
#6
Check Top Shop Viper bags and their Minister fender. The 4.5 bags are cut at an angle on the bottom. There not cheap and suposto not drag when riding aggressive. It's is my plan for the winter.
Last edited by Gwaxley; 07-07-2015 at 08:03 AM.
#7
Trending Topics
#8
http://www.milwaukeebagger.com/mobil...Code=MB-08SP-B
Here are the ones I used on my 07. Was worth the money to save the bags. Only ones at the time that not only protected the bottom but also the edge. Not sure if anyone is making one that protects the edge like these
Here are the ones I used on my 07. Was worth the money to save the bags. Only ones at the time that not only protected the bottom but also the edge. Not sure if anyone is making one that protects the edge like these
#9
This will be a winter project of mine (new rear fender & 4.5 extended bags) - when I pick-up my 15' SGS I pulled the stock shocks off and installed a set of 13" JRI shocks which bumped up the back, when I put the 21" wheel in the front it leveled the bike back out with just a little higher stance - something to think about.....