3" install on a suicide shift NT
#1
Join Date: Aug 2008
Location: Crosswicks, Dirty Jersey
Posts: 353
Likes: 0
Received 2 Likes
on
2 Posts
3" open primary install on a suicide shift NT
Well last Thursday i got in the 3" Exile/Primo open primary i ordered. So i got my tools ready and my camera and started to rip into it. I didn't have a special tool so the farmer came out in me. hey it worked. Here is the install.
Before
The parts laid out
Outer primary cover off
Hey it worked and the 3/4 in ratchet didn't get thrown.
The primary off and laid out
The Battery had to come out and oil tank wiggled to get to the started which is bolted to the inner primary. To get to the allen bolts i used a round swivel head 3/8 ratchet and a 11" extension.
Primary off
I had to cut a sleeve off the trans main shaft. I just put a cut into it the used a chisel to crack it and it came right off.
Here is the rest of the install and the 3" open primary on the bike.
Thanks for taking the time to look at what i did last Saturday.
Before
The parts laid out
Outer primary cover off
Hey it worked and the 3/4 in ratchet didn't get thrown.
The primary off and laid out
The Battery had to come out and oil tank wiggled to get to the started which is bolted to the inner primary. To get to the allen bolts i used a round swivel head 3/8 ratchet and a 11" extension.
Primary off
I had to cut a sleeve off the trans main shaft. I just put a cut into it the used a chisel to crack it and it came right off.
Here is the rest of the install and the 3" open primary on the bike.
Thanks for taking the time to look at what i did last Saturday.
Last edited by SpyderTB; 05-11-2009 at 09:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post