Guys i have a 1968 shovelhead with the stock 4 speed trans i put a set of baker gears in it about 5 years ago. When i bought the bike in crates. It came with a kicker cover burried in one of the crates now that i have found it i wan to install it. I took the cover off of the trans and the gear comming off of the shaft in the trans is no where near big enough to even make contact with the kicker gear. The bike has electric start on it now but it is always nice to have the kick start plus i love that look. i will try to post pictures tomorrow. Can some one help me with an immage of the proper set up inside the kicker cover. thanks