hello all. so my bike goes through the gears fine when the bike isn't running but when I start it and try to go through the gears with the clutch, no go. I noticed that the clutch is really hard and barley pulls in at all. I checked the adjustment, and opened the primary and it doesn't look like the clutch is doing anything when I pull it in. and believe me when I say pull it it barley moves. any help would be great. thanks

 

bump!

 

bump[

 

Deleted post

 

If you are still having problems go to the DIY Trans/Clutch section, where you will find two stickys on clutch adjustment. Do it 'by the book' and let us know how things turn out.