2:1 ceramic system for 014 FLS...
11-12-2014, 07:59 PM
Ultimate HDF Member
Thread Starter
Join Date: Jul 2014
Location: MASS_hole
Posts: 5,652
2:1 ceramic system for 014 FLS...
Maybe pickin them up.
Anyone with them on a slim care to chime in and share your views would be greatly appreciated. Thanks!
11-13-2014, 09:37 AM
Join Date: Jul 2014
Location: Tennessee
Posts: 221
Likes: 0
I had them on a 96" Dyna and really liked them. I used a 2" baffle and they made good power and sounded great.
11-13-2014, 10:09 AM
Ultimate HDF Member
Thread Starter
Join Date: Jul 2014
Location: MASS_hole
Posts: 5,652
Not too loud in your opinion?
Just spoke with a tech (Mike) and he assured me that the 2" is their quites and not overly obnoxious
11-13-2014, 02:41 PM
Join Date: Oct 2009
Location: Indiana
Posts: 914
Likes: 0
We usually recommend the larger baffles sizes but they are loud. The smaller baffle sizes are not obnoxiously loud in my opinion. Thanks for considering Rush!
11-13-2014, 03:22 PM
Ultimate HDF Member
Thread Starter
Join Date: Jul 2014
Location: MASS_hole
Posts: 5,652
I noticed that some extend beyong the rear wheel. Are those a different model alltogether?
11-14-2014, 09:40 AM
Join Date: Oct 2009
Location: Indiana
Posts: 914
Likes: 0
Yes. The Wrath 2:1 stepped header system has a larger muffler body and extends a bit more. That system has better performance but you'll really only see it on bikes with huge engine builds. If you like the look, the system will perform just as good as the standard 2:1 or slightly better.
11-14-2014, 02:33 PM
Ultimate HDF Member
Thread Starter
Join Date: Jul 2014
Location: MASS_hole
Posts: 5,652
Happy that the one I'm getting is shorter. Thankx!
12-14-2014, 12:55 PM
Ultimate HDF Member
Thread Starter
Join Date: Jul 2014
Location: MASS_hole
Posts: 5,652
And DONE!
Went through M&M cycles. Best price I could find.
Maybe Rush Racing might consider a short extension to add some slant?
12-15-2014, 10:34 AM
Join Date: Oct 2009
Location: Indiana
Posts: 914
Likes: 0
Great! Thanks for choosing Rush! Are you referring to a slanted tip or the muffler body section?
12-15-2014, 01:39 PM
Ultimate HDF Member
Thread Starter
Join Date: Jul 2014
Location: MASS_hole
Posts: 5,652
Quote:
Originally Posted by
Rush Racing Products
Great! Thanks for choosing Rush! Are you referring to a slanted tip or the muffler body section?
The muffler! Just in line with the lower bar on the swing arm would be awesome!
Sold as an add on perhaps?