2010 SE Street Glide Seat?
#2
#4
#6
They'll fit an 09 or 10 regular Street Glide (we tried mine on both, but not on an 09/10 regular Electra Glide.....the tank dash should be the only thing to consider where it meets the tongue of the seat). But with the difference in the frame from the 08 to 09/10 frames, I can't hardly believe that the seat would fit an 08. I'd try it before I bought it.
The 10 SESG seat is the most comfortable stock seat I ever rode on for two hundred miles (usually about when monkey butt starts setting in on a stock seat). I still switched to Corbin.
The 10 SESG seat is the most comfortable stock seat I ever rode on for two hundred miles (usually about when monkey butt starts setting in on a stock seat). I still switched to Corbin.
Last edited by Open Road; 11-01-2009 at 08:52 AM.
#7
Trending Topics
#9
This seat is very comfortable but HD has come out with a new production of this seat with an assist to the weak seat pan. It's so week it pulls back from the tank console as stated above.
Allen, with Mean City Cycles, has fixed several of these seats for his local dealer by beefing up the pan and adding a little more foam to the tongue.
My worry is the frame tongue will wear out the plastic seat pan with age so the seat will move side to side.
Allen, with Mean City Cycles, has fixed several of these seats for his local dealer by beefing up the pan and adding a little more foam to the tongue.
My worry is the frame tongue will wear out the plastic seat pan with age so the seat will move side to side.
#10
SESG Seat mis manufactured
My SESG had the gap on the showroom floor unladen. The dealer is working with Tech Servise to resolve the issue.
I provided them with pictures of the CVO seat gaps then pictures of a factory Street Glide seat and a Factory Sundowner seat. Both of these cover the dash panel by at least an inch. This clarely shows that the CVO seat is made almost 2 inches too short.
Still waiting to see what the MOCO does?