lowering kit
#1
#2
Join Date: Dec 2004
Location: Texas! Ya mean there's someplace else?
Posts: 11,062
Received 1,211 Likes
on
461 Posts
RE: lowering kit
Look real close at the pic below (yeah, right - like you can see anything!). I cut the shock mounts off the top of the swingarm, then drilled and sleeved through the swingarm at the location I wanted the shocks to mount.
Others simply reversed the swingarm so the shock mounts were now on the bottom, but you have to do something about the chain guard mount.
One thing to know is that if you run drag pipes with the butt lowered, the front one will drag.
Others simply reversed the swingarm so the shock mounts were now on the bottom, but you have to do something about the chain guard mount.
One thing to know is that if you run drag pipes with the butt lowered, the front one will drag.
Thread
Thread Starter
Forum
Replies
Last Post
60wt
Frame/Suspension/Front End/Brakes
0
06-15-2009 06:39 PM