Speaking of compensating nuts...
03-24-2012, 02:55 PM
Join Date: Nov 2007
Location: cranford, nj
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Speaking of compensating nuts...
Anybody use red locktite on the nut, or is the 100ftlbs torque enough?
03-24-2012, 08:29 PM
Join Date: Oct 2005
Location: Santa Klaus County, Cali
Posts: 7,271
Never used Locktite but if so I think I would use blue and not red. Also on torque I use middle ground...b ook says 80-100 so I use 90. Never had one back off....yet.
03-24-2012, 10:08 PM
Join Date: Nov 2007
Location: cranford, nj
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
had mine back off 2 days ago. changed the chain last year- thought I had it cranked down good. Didn't come off, but I was able to turn it no problem with a wrench. The chain rubbed against the tensioner bar. What a noise. Thought my bottom was toasted.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SummitRK
Primary/Transmission/Driveline/Clutch
13
04-27-2020 07:56 PM
eagles350
EVO
15
05-06-2014 09:49 PM
robvg
Touring Models
18
03-26-2013 07:51 PM
tazmandevil
Touring Models
5
06-20-2008 06:34 AM
rleggs
Primary/Transmission/Driveline/Clutch
5
03-09-2007 09:14 PM