audio read switch
#1
audio read switch
how do i test the audio read switch for the advanced volume control on an 1996 flhtc. the test i performed was this: multi-meter on 20 volts range,grounded on bike frame with the positive lead on the white and green striped wire going in the speedometer. I get a reading of 7.5 volts, when I turn the front wheel forward the voltage goes down the faster i turn, down to 1.3 volts when i turn as fast as i can by hand. am i doing doing the right procedure
#3
how do i test the audio read switch for the advanced volume control on an 1996 flhtc. the test i performed was this: multi-meter on 20 volts range,grounded on bike frame with the positive lead on the white and green striped wire going in the speedometer. I get a reading of 7.5 volts, when I turn the front wheel forward the voltage goes down the faster i turn, down to 1.3 volts when i turn as fast as i can by hand. am i doing doing the right procedure
Thread
Thread Starter
Forum
Replies
Last Post
acchd
Electrical/Lighting/Alarm
2
05-13-2020 05:36 PM