2014 Stage 4 with Woods TW 5-6 Cam +
#1
2014 Stage 4 with Woods TW 5-6 Cam +
Hello, I just set up an appointment to have the shop install Screamin' Eagle 103 ci Street Performance Stage 4 Kit-92500011 with a Woods TW-5-6 Cam, and the Screamin' Eagle Chisel Extreme Billet Air Cleaner Kit. I have already installed a Python Throwback Exhaust. The total price out the door including the Dyno Tuning is $4147.
My questions are: 1. Does this sound like a reasonable price (HD doint the work). And 2. What kind of numbers are people seeing out of this or similar setup? The shop tells me anywhere from 112HP-120HP and a bit over 120 torque.
Any advice or comments are welcome.
Thanks in advance!
My questions are: 1. Does this sound like a reasonable price (HD doint the work). And 2. What kind of numbers are people seeing out of this or similar setup? The shop tells me anywhere from 112HP-120HP and a bit over 120 torque.
Any advice or comments are welcome.
Thanks in advance!
#5
I'm just going to be honest, so apologies for seeming rude.
the HD Stage IV isn't a true stage IV.. just be clear on that.. they call it a Stage IV, but there's no turbo or nitrous or whatever, so it's not a Stage IV, it's a Stage III at best.. and that's an obnoxious amount of money. That's $2000 more than I paid for my Fuel Moto 107" with the heads and compression releases, and I make about the same amount of power/torque.
I don't know your level of mechanical expertise, for me I know my clockwise from my counter clockwise and I was able to build the engine myself, step-by-step, in about 10 hours.
But, like Cdonis said..if you're happy with it, then I'm happy for you and just remember to keep the rubber side down
the HD Stage IV isn't a true stage IV.. just be clear on that.. they call it a Stage IV, but there's no turbo or nitrous or whatever, so it's not a Stage IV, it's a Stage III at best.. and that's an obnoxious amount of money. That's $2000 more than I paid for my Fuel Moto 107" with the heads and compression releases, and I make about the same amount of power/torque.
I don't know your level of mechanical expertise, for me I know my clockwise from my counter clockwise and I was able to build the engine myself, step-by-step, in about 10 hours.
But, like Cdonis said..if you're happy with it, then I'm happy for you and just remember to keep the rubber side down
#7
Trending Topics
#8
#10
Thanks for the response everybody. And yep I know I am paying more going through Harley. But it's the convenience too since they will come pick up and deliver from 40 miles away. I had thought of fuel moto but that would require me getting the bike to and from Wisconsin in the winter. It was a tough choice.