Could have been worse!
10-07-2015, 01:16 PM
Intermediate
Thread Starter
Join Date: Oct 2014
Location: Bertram, Texas
Posts: 48
Could have been worse!
10-07-2015, 01:51 PM
Join Date: Dec 2011
Location: iowa
Posts: 547
Likes: 0
10-07-2015, 02:15 PM
Join Date: Aug 2012
Location: rio rancho n.m.
Posts: 892
better put that puzzle together to make sure your not missing a piece,, I would not trust it !!!
10-07-2015, 04:37 PM
Join Date: Jun 2010
Posts: 604
That must have made your butt pucker. High speed or low?
10-07-2015, 05:22 PM
Join Date: Feb 2010
Location: Livermore, CA
Posts: 560
Likes: 0
Did you find the wrist pin clip? If not I would fish around with a telescoping magnet.
10-07-2015, 05:25 PM
Join Date: Nov 2008
Posts: 272
Likes: 0
Not even a ashtray left dam.
10-07-2015, 06:37 PM
Join Date: Apr 2010
Location: Western MD
Posts: 2,477
Likes: 0
Yeah, that's not good.. JB Weld aint gonna help that.
Looking at the first pic, it looks like the piston burned down to the oil rings and said ***** it, i'm outta here..
10-07-2015, 06:38 PM
Intermediate
Thread Starter
Join Date: Oct 2014
Location: Bertram, Texas
Posts: 48
To JMN1960.
Took the lower end hung it up side down and flushed it out with brake cleaner and air thru1/8"copper tubing 5 times. rolled it all around and feel good about it. I'm a poor boy and disabled my budget is limited. Scooter is our main transportation.
Last edited by Papa Jack; 10-07-2015 at 07:12 PM .
10-07-2015, 06:40 PM
Intermediate
Thread Starter
Join Date: Oct 2014
Location: Bertram, Texas
Posts: 48
To Just Enough.
Clips were still in place, not a problem.
Last edited by Papa Jack; 10-07-2015 at 07:10 PM .
10-07-2015, 06:49 PM
Intermediate
Thread Starter
Join Date: Oct 2014
Location: Bertram, Texas
Posts: 48
To Froggy FatBoy.
My feeling also, I ordered the timing window and it came after we had already left for Stugis mile266in CO. and my exhaust tik wasn't. At 70yrs. I'm not hearin anything like I used to.
Last edited by Papa Jack; 10-07-2015 at 07:09 PM .