okay, witch plug do i plug into the siren? none of these look like the one in the instructions. it's an 07 Heritage with the factory alarm.


[IMG]local://upfiles/24434/3082690C147D4504A7A1796A29E8C23F.jpg[/IMG]

 

It is very easy to install...see center of pic...
Here's pics of my install on an '03


Before:

[IMG]local://upfiles/6335/94A5493E63564D6DB539E37BC959FEAF.jpg[/IMG]


After:

[IMG]local://upfiles/6335/C7B191D934DA4756A719945339DA806C.jpg[/IMG]


Look's like it might be this connector on yours.



[IMG]local://upfiles/6335/085AD240C2974ACABDB982D0AC010BF9.jpg[/IMG]

 

I have the same bike and siren, it seems to me when I installed it that the siren plugged into either the alarm/turn signal module directly or else there was a pigtailed connectorcomming out of the module that the siren plugged into. As I recall it was obvious and that the siren would only plug in one place.

 

Thank you for your help guys. Agapsdiver you were right it is that plug you pointed out on mine.