Cobra 2 headlight
#1
04-10-2008, 03:36 PM
Join Date: Dec 2007
Location:
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
#2
04-10-2008, 06:58 PM
Road Captain
#3
04-11-2008, 07:48 AM
Join Date: Dec 2007
Location:
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
RE: Cobra 2 headlight
The part I can get out is the lens, do I unscrew the clear lens (the part the tech said had loctite) or the chrome ring inside the visor? I tried to unscrew it and it did not budge. The tech also told me to put the whole assembly in the oven at 200F to loosen the loctite?? I'm not into baking my parts at this point. Any pointers?
#4
04-11-2008, 08:31 AM
RE: Cobra 2 headlight
ORIGINAL: NCDEUCE
The part I can get out is the lens, do I unscrew the clear lens (the part the tech said had loctite) or the chrome ring inside the visor? I tried to unscrew it and it did not budge. The tech also told me to put the whole assembly in the oven at 200F to loosen the loctite?? I'm not into baking my parts at this point. Any pointers?
The part I can get out is the lens, do I unscrew the clear lens (the part the tech said had loctite) or the chrome ring inside the visor? I tried to unscrew it and it did not budge. The tech also told me to put the whole assembly in the oven at 200F to loosen the loctite?? I'm not into baking my parts at this point. Any pointers?
For the outer ring I just use my thumbs to unscrew it.
On the front of the inner ring, there are 3 holes. I insert small metal punches in two of these holes and use them to turn the inner ring.
Thread
Thread Starter
Forum
Replies
Last Post
