Just got my parts in. If anyone has done this themselves need some advice. How easy is this? Are there instructions anywhere??? Or a website to see pics and instructions?
Thanks Guys

 

Post a pic when you get it done.&nbsp\\; I'd like to see how it sits.&nbsp\\; I've found a few posts on here on the install.&nbsp\\;

 

Ill do that. How the hell do I put a pic of my bike below all my posts??

[IMG]local://upfiles/65357/8CF4AFD8E2174D4282F7FDF55098F67A.jpg[/IMG]

[IMG]local://upfiles/65357/790B03322353474D92BEAD96805670F4.jpg[/IMG]

 

Which kit do You have?

 

I have the 2 bolt kit, Brand is midwest got it off of Demoncycle.com

 

Aaack!!!&nbsp\\;&nbsp\\;&nbsp\\; Demoncycle! [:'(]

 

sweet bike there mojo

 

Have you tried a search?&nbsp\\; There have been some posts on this in the past.&nbsp\\; Someone at one time included a nice link that took you to a site with step by step instructions with photos for this.

 

I put one on my 08, i went with burly kit from j&amp\\;p cycle. It is not hard to do.Just done rear so far. The shocks can be a little of a b-h to get of. I took my shocks to local stealer and had them put the extenders on for me,you need a press to do it,cost me 35 bucks.I am waiting to do the front when i go to a inverted front end
Nice ride mojo, love your front end.I am going with a 58mm or a 65 mm.Cant wait.
If i can help anymore let me know.
On a scal of 1 to 10 it is about a 3&nbsp\\; Not hard to do.
&nbsp\\;
DJ

[IMG]local://upfiles/58656/D751CA1F67D4404597B2A70DAA9A209A.jpg[/IMG]

[IMG]local://upfiles/58656/23D6FEDF78224F52BC122032B3D51F4D.jpg[/IMG]

[IMG]local://upfiles/58656/0371455F312F407E83166044BFC24207.jpg[/IMG]

 

Thanks Ill do that. It seems everyone has taken thier shocks to have them pressed. I have done a search and cannot find the link. But Im sure Ill figure it out somewhow.