Kuryakyn Plug-n-Play Sissy Bar Mount???
#1
Kuryakyn Plug-n-Play Sissy Bar Mount???
I initially asked over at the Dyna forum, but know several of you guys run these too...
I know the mount accommodates certain older Dyna and Sportster uprights, but does it accept a rack as well? I was thinking about using one with this upright and rack combo, but don't know if the rack will actually work.
Rack
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Upright
http://www.harley-davidson.com/gma/g...bmLocale=en_US
I know the mount accommodates certain older Dyna and Sportster uprights, but does it accept a rack as well? I was thinking about using one with this upright and rack combo, but don't know if the rack will actually work.
Rack
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Upright
http://www.harley-davidson.com/gma/g...bmLocale=en_US
#2
Go with Haulen *** backrest and after market rack. Here is mine. Comes off in under 3 min.
http://www.flickr.com/photos/9044807...7605077006192/
http://www.flickr.com/photos/9044807...7605077006192/
Last edited by tk353; 11-02-2008 at 10:55 AM.
#4
I used the roadking pad and it serves the purpose and is taller. I took a trip with the pinion seat and the backrest. I rode solo so i took the raley pack and placed it where the passenger would have been and used it as a backrest for me. I think with the harley you will have to relocate the turn lamps and the standoffs are not nice looking.
Last edited by tk353; 11-02-2008 at 11:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post