PowerVision Glitch
#1
PowerVision Glitch
Last year I bought a PowerVision from Fuel Moto and loved it.
I haven't had it out in months, but last night hooked it back up and mounted the unit on the handlebars for some auto tune riding.
The problem is that it is stuck showing the DynoJet logo and nothing else. I don't get the selection boxes I was expecting.
I did a search on here and found that Fuel Moto suggested running the cable away from the coil and engine which I did but nothing changed.
Anyone have a similar problem? Please let me know if I forgot a step or am doing something dumb. Thanks.
I haven't had it out in months, but last night hooked it back up and mounted the unit on the handlebars for some auto tune riding.
The problem is that it is stuck showing the DynoJet logo and nothing else. I don't get the selection boxes I was expecting.
I did a search on here and found that Fuel Moto suggested running the cable away from the coil and engine which I did but nothing changed.
Anyone have a similar problem? Please let me know if I forgot a step or am doing something dumb. Thanks.
#2
just for a quick test. Plug it into your PC and see if it works there. In WinPV, go to Powervision tab, Diagnostic/Test Functions, and Exit PC link mode. From there you should have access to the Power Vision touch screen.
If this doesnt work, run PV update client to see if it will do a firmware update. Then test again.
If this doesnt work, run PV update client to see if it will do a firmware update. Then test again.
#3
just for a quick test. Plug it into your PC and see if it works there. In WinPV, go to Powervision tab, Diagnostic/Test Functions, and Exit PC link mode. From there you should have access to the Power Vision touch screen.
If this doesnt work, run PV update client to see if it will do a firmware update. Then test again.
If this doesnt work, run PV update client to see if it will do a firmware update. Then test again.
Thread
Thread Starter
Forum
Replies
Last Post
Dustball
Ignition/Tuner/ECM/Fuel Injection
12
02-24-2011 07:04 PM