I just got a pair of Screamin eagle slip ons and I wanted to remove the baffles to remove a little packing. The bolts that hold the baffles in are the type that have that little "tit" sticking in the middle where the torx bit goes. Where can I get that special tool?

 

i've never seen torx head with a little "tit" but i have seen allen head with them . Check with advance auto or ace hardware. My license plate bolts have allen head with the "tit". Got them at advance. By the way, my screaming eagle pipes were made as such that i couldn't take any packing out but that didn't keep me from enlarging all the baffle holes. Good luck!

 

Those are called security screws meant to keep people from tampering with critical screws like on an elevator. Sears has them and I think Harbor freight does too. Cheap, $10 or so for the whole kit.

 

whoa, ive seen ***** on a receiver hitch before but never **** on exhaust pipes!

I apologize for that right there, but i couldn't help myself

 

Options http://search.harborfreight.com/cpis...bits&Submit=Go

 

maybe you could just grind off the tit, like with a dremel or something?

 

Sears have the tamper torx heads.