2008 Rocker C front tire
#1
2008 Rocker C front tire
Went to the local scooter store to see about some tires... Anyone know if I can put 100/90-19 on the front of my FXCWC? Long story short, better tires, better deal if I can go up just a little.... Would like to hear especially from any other Rocker owners that have changed their tire size...
#7
Yes. I ordered the Heartland Rocker Replica 21" through Drew,(DR V-TWIN).
By slotting the stock fender mounting holes, I'm able to run the stock fender over it.
My sig picture is old and still shows the stock 19".
A couple of guys have threatened to sneak in my garage and paint my bike red if I don't update my sig soon....
By slotting the stock fender mounting holes, I'm able to run the stock fender over it.
My sig picture is old and still shows the stock 19".
A couple of guys have threatened to sneak in my garage and paint my bike red if I don't update my sig soon....
Trending Topics
#8
#10
Last November when my bike was up on a stand getting it's motor bigger and prettier I noticed that the front stock Dunlop tire was very badly cupped and the sidewalls were also very badly split after 3 years and 6K miles. The tire shop guy suggested an ME880 on the rear and to upgrade to a 3.25 x 19 ME Lasertec on the front. What an improvement!!!! The rear no longer rolls over (or slides off) the top of ridges and no longer slides into grooves and the front now feels like it swoops or glides or floats around curves. It feels like a lot of weight has been lifted from the front end. I now have to back off of turn pressure on the bars when I do turns so that I don't oversteer the curves I have always taken. I live in the hills of AZ and have to (how sad!) do many twisties when I leave town in either direction. Will never buy Dunlops again for the Rocker. Now I just have to see how long the ME's last. Hope it's longer than the Dunlops. Sure is more fun (and easier) to ride now.
Last edited by Rockerliker; 05-04-2012 at 10:38 AM.