Breakout Side Mount plate AND T/S Standoffs
#1
Breakout Side Mount plate AND T/S Standoffs
I was planning on putting a Side mount plate set up on my FatBoy so I bought all the necessary stuff. Breakout side mount plate assembly with the LED plate light, and both stand offs to convert a FatBoy to the Breakout plate. I also will include the wire and socket so you can plug the wiring into the socket on your tail light meant for fender tip lights so it will work fine. All you need to do for a FatBoy is trip the wires to the length you want and attach them to the socket. Easy mod. I also have a stock FatBoy fender from an 09 that was bobbed 4 inches to sell separately.
This stuff was bought new from a dealer and cost about $200. $150 takes it all shipped. Any questions, just ask.
This stuff was bought new from a dealer and cost about $200. $150 takes it all shipped. Any questions, just ask.
#3
The plate brackets and standoffs are all metal, the plate mount itself is a thick plastic I believe. I will ship it out of the country for the additional cost of shipping. I would measure and weigh the package and tell you the approximate cost, then ask you to pay in USD via Paypal
Last edited by Gunnysgt; 01-11-2015 at 08:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Colin1966
Want To Buy Motorcycles/Parts/Accessories
0
05-29-2010 02:13 PM