So I bought a dyna rear wheel for my bike, had a brand new set of 3/4" bearings installed with around 150 miles on them and I'm just not sure I'm into the taller wheel. Kinda miss the solid wheel look, so seeing if there is any interest in this setup. Would like to get what I have in the whole package before shipping, wheel, tire, tube and bearings all for 425 shipped. Tire has roughly a 1000 miles on it and is a stock 160/70 17. It looks good and I have gotten a lot of complainants, guess I'm just old school and I don't care for a big wheel out back. The wheel combo went on with zero issues and should fit any bike running a 3/4" axle. May also trade towards a solo seat, exhaust (would love skirt blowers), other cool parts or a 16" rear spoke wheel with great tireHere's a few pics mounted.

 

Bump, someone has got to want to upgrade for a bigger wider wheel

 

bummer - too wide for me Bump for you - hoping for a quick sale!

 

Just so everyone knows, my bike came stock with the 16x3 with a 150/80 tire. So this is a quick and easy way to get a bigger look out back for those looking to upgrade, or if you have a deuce its a great way to replace the stock solid wheel to match the front

 

Can a bearing change make it work on a 1" axle? I've wanted spoked forever for my deuce, I just chromed my rear stock wheel instead and did bearings and a tire today.

 

yeah... mine will take max 4.25 rim it's a 130 stocker :/ Somebody should jump on this wheel!

 

If weelo88 was looking to trade for a 17" wheel I'd be all over this. My '00 Deuce rear mag is chrome, but it's a 17" and not spoked (duh) so no dice when weelo88 wants a 16" spoke setup. Otherwise would've been a great straight trade as mine also has a new tire (~1k miles on it, 160/70 HD Dunlop), etc...

Sixshooter, pretty sure all it takes is a bearing swap and it'll bolt right into your Deuce. Do eet! If I had the $$ I'd be all over this, the asking price is hard to walk away from.

 

Any pics blue92? And yes, it had 1" bearings before so you would just have to swap them back out. Reason I have it listed in the Softail and not multi fitis because I swapped the stock bearings and I can say without a doubt it will work on softails that came stock with a 150 rear and 3/4" axle

 

Would there be any way you'd sell just the rim? I don't need the tire, tube or bearings, and if the price is right I'd take the rim off your hands. I'll probably roll with my chromed deuce rear for a while, then swap it out when it's time for a new tire, do it all in one shot.

 

No cause a used tire and the other parts probably won't sell by themselves or if they do it wouldn't be much and would cost me around 25-30 just to have the tire and bearings removed. If i sold the rim alone it would be close to the package price, So I prefer to sell complete.