Hi All,


New here and I need some help! I recently purchase my 2015 HD 48. Stock.


I am about to put my first two after market parts on myself.


Passenger pegs and V&H shortshots full system exhaust.


My main question is: On the right side I see where the passenger foot peg mount should go but the rear brake master cylinder is occupying the bolts I need for the mount. Am I somehow moving the master cylinder? pictures would help!


Also any tips you have on installing the exhaust system is appreciated! Thanks

 

Are these the pegs you bought?
http://www.harley-davidson.com/store...07-50500270--1

Instructions- https://serviceinfo.harley-davidson....document/61011

The instructions reference the Service Manual for removal of the master cylinder.
The Service Manual is a good investment if you are going to work on your bike.

 

As per above, the FSM (not a cheap aftermarket copy) will earn it's keep on this upgrade alone.

 

The 1st thing is that you don't have to post the same question (worded different) twice

https://www.hdforums.com/forum/sport...m-exhaust.html

 

I'll save user cvaria some time and tell you this right now. Dont buy the shortshots.

 

Now that there is funny

But I think he's already bought them

 

Sorry dude. First time in the forum, I did not see my first time writing the question posted so I jumped the gun and posted again.

Why do you say that? I haven't taken them out of the box yet! Any better recommendations?