please help, fuel injection??
#1
please help, fuel injection??
ok i am wanting to put short shots or diggers on my 08 nightster, also the elbow with open filter element. I am gonna put them on myself. My question is how do i have the air fuel fixed, tuned or remaped, of course the dealer says its gonna cost a ton, \\;they say it needs \\; \\; this and that and everything else to make it work. Really guys what is the best way i can do this, i cant seem to find anyone in NC or my area to help me to the fullest. I really have read alot about dealers tryin to screw u and make the money so please help me out, what i need and how much it usually cost. Thanx alot
#2
RE: please help, fuel injection??
Well I'd recommend you by a Power Commander III (PCIII) from Jamie at Fuel Moto, www.fuelmoto-usa.com
 \\;
The software that comes with the tuner allows you to program (remap) your bike at will. \\; The software comes with base MAPS for the setup you are looking as well as many others. \\; Plus when you order it, tell Jamie what mods you have done (Aircleaner and Exhaust) and he will program it for you. \\; I will say that the MAPs the software provides are not always 100% correct for you particular bike and area so you may have to tweak a few number here and there, but Jamie will work with you on this. \\; Plus with the PCIII you have the ability to take it to a Dynojet Center and have it dyno tuned and a custom map made for your bike. \\; There are several Dynojet centers around the country. \\;
 \\;
The PCIII runs $279
 \\;
There are several other Programmer out there, but I have experience with the PCIII and enjoyed it
 \\;
The software that comes with the tuner allows you to program (remap) your bike at will. \\; The software comes with base MAPS for the setup you are looking as well as many others. \\; Plus when you order it, tell Jamie what mods you have done (Aircleaner and Exhaust) and he will program it for you. \\; I will say that the MAPs the software provides are not always 100% correct for you particular bike and area so you may have to tweak a few number here and there, but Jamie will work with you on this. \\; Plus with the PCIII you have the ability to take it to a Dynojet Center and have it dyno tuned and a custom map made for your bike. \\; There are several Dynojet centers around the country. \\;
 \\;
The PCIII runs $279
 \\;
There are several other Programmer out there, but I have experience with the PCIII and enjoyed it
#3
#4
RE: please help, fuel injection??
They are called Insomniac Pipes from Pipedreamz www.pipedreamz.biz
 \\;
Yes you can buy them with the O2 ports, but if you go with the PCIII you do not need them since the O2 sensors are removed
 \\;
Yes you can buy them with the O2 ports, but if you go with the PCIII you do not need them since the O2 sensors are removed
Thread
Thread Starter
Forum
Replies
Last Post