First gear jerking
#1
#2
Now, to my opinion. In gear, with clutch pulled in, does bike pull any while on a level hard surface?
When you start releasing lever, when do you fill the clutch starting to engage?
What was it doing before you decide to adjust clutch?
How many miles on bike and how long it been since last maintenance?
When a wet(oil) clutch is adjusted properly and the engagement is not smooth, it's usually do to the warped overheated steels that the fiber faced plates grab to.
This can come from abuse or a ill adjusted clutch that was slipping awhile.
Last edited by Jackie Paper; 02-02-2023 at 02:59 PM.
#3
2002 XL 1200 Sporty. I recently adjusted my clutch screwed the center screw all the way to resistance, backed it off a quarter turn. I've got my clutch lever perfect, 1/8 play. When I go to take off it's jerky it's not a smooth take off what could be the problem. What did I do wrong
Last edited by Tileman2692; 02-02-2023 at 12:50 PM.
#4
#5
#6
2002 XL 1200 Sporty. I recently adjusted my clutch screwed the center screw all the way to resistance, backed it off a quarter turn. I've got my clutch lever perfect, 1/8 play. When I go to take off it's jerky it's not a smooth take off what could be the problem. What did I do wrong
.Your description seems to indicate you did it backward?
John
Last edited by John Harper; 02-02-2023 at 01:07 PM.
#7
Long story, short. Few months ago my clutch / throw out bearing disintegrated. Trailered it home any put it on the jiffy. I recently pulled the bearing out and got all pieces out including all th steel *****. Clean and simple procedure. Changed all fluids filled tank with fresh 93 octane. Figured I'd adjust the clutch and correct the play in the clutch lever. Took for a ride , that's when it started. She's Back in order except the jerking 1st gear
Trending Topics
#8
#9
#10