Newbie needing a little help . . .
#1
Newbie needing a little help . . .
Hey guys, just purchased an '04 XL1200R and can't be more happy with the bike.
Two days after I bought it I layed her down in some gravel. Minimal damage but I did tweak the forward control bracket on the clutch side.
I've ordered some new forward control brackets but need to know how much to torque the bolts to when I install them.
Thanks in advance and boy am I glad I found this board
Two days after I bought it I layed her down in some gravel. Minimal damage but I did tweak the forward control bracket on the clutch side.
I've ordered some new forward control brackets but need to know how much to torque the bolts to when I install them.
Thanks in advance and boy am I glad I found this board
#2
RE: Newbie needing a little help . . .
When you pick up the part (and this works for any HD parts)
The parts counter guys can print out the installation instructions and all the torque values for you. Pay attention though because they will use inch lbs and foot lbs on the same page. If it doesn't make sense, re-read it Many have learned the hard way.
Welcome to the forum's from Northern California!!
[sm=welcomesign.gif]
The parts counter guys can print out the installation instructions and all the torque values for you. Pay attention though because they will use inch lbs and foot lbs on the same page. If it doesn't make sense, re-read it Many have learned the hard way.
Welcome to the forum's from Northern California!!
[sm=welcomesign.gif]
#7
Trending Topics
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
RICHFRESH
Primary/Transmission/Driveline/Clutch
2
06-11-2023 02:11 PM