I will be replacing the timer cover with a skull one and was wondering will there be any fluid that might leak out. Will I need to make sure the bike is level.

 

What year?

The 2004+ engine timing system uses the flywheel to determine engine speed timing, which is suppose to reduce engine complexity and enhancing calibration and spark delivery.

The traditional XL Evolution timing cover is retained for styling purposes, but is only 'cosmetic'.

Just pull it off and install a new cover. I used the "Flame Collection" timing cover to go along with the other Flame Collection goodies I added.

 

2005 883l

 

hi blue all on the timer cover their is not fluid in there is nothing to leak or fall out you can just change it out with the new cover with no problem

 

I did a 2003, It was pop riveted on. Dealer said if the replacement had horizontal holes then it is reriveted. if holes are vertical then it gets screwed on. This was for earlier than 04models.[&:]

 

YEP, I DID NOT FIND A DARN THING IN THAT HOLE ETHER.
SIMPLE REMOVE SCREWS AND REPLACE WITH WHAT TURNS YOU ON

 

good question. wife wants the "package" she saw in catalouge. i know the air cleanesr no prob but large round on one side has no oil to leak out on 07 1200xlc???? isnt there a small one on the other side also???