Mids, heat shields, 1200 air intake
#1
Mids, heat shields, 1200 air intake
Some stock parts off a 2009 Sportster 1200
Complete mid set including bolts (not pictured), pegs, frame mounts, shifter lever $70 shipped -SOLD-
Stock 1200 A/C assembly $60 shipped
Stock heat shields BBQ paint $60 shipped
Stock mufflers if your local can have em, I debaffled them and had to run a bolt through the middle to hold em in for an inspection so they are throw aways unless someone wants to lolipop them or similar.
Other parts in the picture are listed in the Dyna section.
Complete mid set including bolts (not pictured), pegs, frame mounts, shifter lever $70 shipped -SOLD-
Stock 1200 A/C assembly $60 shipped
Stock heat shields BBQ paint $60 shipped
Stock mufflers if your local can have em, I debaffled them and had to run a bolt through the middle to hold em in for an inspection so they are throw aways unless someone wants to lolipop them or similar.
Other parts in the picture are listed in the Dyna section.
Last edited by xantasm; 07-17-2013 at 01:34 PM.
#2
Mid set is sold
If someone is interested in the A/C and the heatshields I will knock $20 and ship em together.
BTW does anyone know what is good for getting oil stains out of the grey PC on the air cleaner that won't damage the color or leave it looking streaked? I tried like windex to see if I could use a mild cleaner and it just chewed up the rag I was using from the uneven surface of the PC. That is why I haven't cleaned off the stains from the previous owner because I don't want to ruin the powder coat.
If someone is interested in the A/C and the heatshields I will knock $20 and ship em together.
BTW does anyone know what is good for getting oil stains out of the grey PC on the air cleaner that won't damage the color or leave it looking streaked? I tried like windex to see if I could use a mild cleaner and it just chewed up the rag I was using from the uneven surface of the PC. That is why I haven't cleaned off the stains from the previous owner because I don't want to ruin the powder coat.
Last edited by xantasm; 07-17-2013 at 01:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Skeet7373
Trikes, Hacks and Trailer Parts
0
07-11-2015 04:07 PM