Wild One bars are longer on the left due to using the stock grips I'm told. All other grips will have small gap on the left between the clutch bracket and thicker part of the bar. I simply trimmed that piece off with a cut off disc before I mounted the bars. No issue
Wild One bars are longer on the left due to using the stock grips I'm told. All other grips will have small gap on the left between the clutch bracket and thicker part of the bar. I simply trimmed that piece off with a cut off disc before I mounted the bars. No issue
Yep, I believe it has to do with in case your using the HD heated grips. They are a little longer on the left side.
On a 2014 Street Glide does the hydraulic clutch line and front brake line have enough slack in them for 12" bars safely? Or would I need to get longer lines?
I went with 16" la choppers , used guerrilla cable extensions , cut and eliminated the green plug. The can bus is easy to run through the bars I believe there's plenty of wire for 12" bars not sure about 14s.
I'm really shooting for 16's too someday. Did you have to get extended brake and clutch cables or did you just need wire extentions you mentioned? The dealer said I'd need brake and clutch cables, so I feel they might be full of it. Thought I'd double check with ya!
Sa me question as ^^^ but different model
Oh and will you post some pictures up please and thanks
Last edited by Sedonastrider; 01-29-2015 at 11:52 PM.