My SG to Shark conversion (other 2014/15 winter mods)
#1
My SG to Shark conversion NEW pics added 3/31 To pages 2&3
UPDATED PICS ON PAGE 2!!
Hey guys... I just thought I would share some progress pics of my conversion. I'm hoping to get it finished, and to Dave Vos for a custom seat, and razor pack pad next week. Tired of having another black SG, so I swapped it to a RG, and went with House of Kolor, Kandy Apple Red over a custom mix metallic silver base. Pics do not do this color any justice. Also swapped my 6.5" speaker lids over to VooDoo lids, and 8.8" JL audio speakers, stayed with 6.5" JL's in the lowers, and JL 6.5" mid woofers, and Hertz st25 horn tweeters in the fairing. Sent the front forks, etc into my chrome guy, along with my tour pak bracket, footboard brackets, and a few other small parts. I went with the Dirty Bird "smooth" wind shield, and had that molded to the fairing for a seemless clean look. Added the Daymakers, Alloy Art front LED signals, hidden fairing brackets, etc. I will post more pics as I get it finished up.
http://i689.photobucket.com/albums/v...&1427382936890
Hey guys... I just thought I would share some progress pics of my conversion. I'm hoping to get it finished, and to Dave Vos for a custom seat, and razor pack pad next week. Tired of having another black SG, so I swapped it to a RG, and went with House of Kolor, Kandy Apple Red over a custom mix metallic silver base. Pics do not do this color any justice. Also swapped my 6.5" speaker lids over to VooDoo lids, and 8.8" JL audio speakers, stayed with 6.5" JL's in the lowers, and JL 6.5" mid woofers, and Hertz st25 horn tweeters in the fairing. Sent the front forks, etc into my chrome guy, along with my tour pak bracket, footboard brackets, and a few other small parts. I went with the Dirty Bird "smooth" wind shield, and had that molded to the fairing for a seemless clean look. Added the Daymakers, Alloy Art front LED signals, hidden fairing brackets, etc. I will post more pics as I get it finished up.
http://i689.photobucket.com/albums/v...&1427382936890
Last edited by ICIBUY; 03-31-2015 at 11:42 AM.
#2
#5
Baldguy13... it really is all just nuts, and bolts/screws. I used actual H-D inner & outer fairings to avoid any hassle or fitment issues with aftermarket parts. Then I just went through the parts list on ronniesharleydavidson's website, and ordered all the hardware I needed. I was lucky enough to find the interconnect harness on ebay real cheap. I did have to swap my bars, which is something I wasn't planning for (just didn't think about that I guess) but it really isn't difficult as far as the labor.
#7