Primary Drive chain tension
#1
Primary Drive chain tension
I've been hunting around but haven't found the answer.
Recently, I had to replace the rotor and stator on my bike. I had the entire primary case off the bike which included the compensator sprocket, clutch basket and the automatic chain tensioner. After I replaced everything, I am now hearing what sounds like either compensator noise(again!!) and what I think is chain noise.
After I reinstalled the chain tensioner(I had a zip tie around it to keep everything in place) it pretty much adjusted itself after I removed the zip tie.
Now, I'm hearing noise again! It's driving my nucking futs! Could it be that there's too much tension on the primary chain or could it possibly be that the compensator sprocket is just a POS? Is there a way to tell if there's too much tension on the chain?
BTW - My bike is an '07 EG UC.
Thank you guys!
Recently, I had to replace the rotor and stator on my bike. I had the entire primary case off the bike which included the compensator sprocket, clutch basket and the automatic chain tensioner. After I replaced everything, I am now hearing what sounds like either compensator noise(again!!) and what I think is chain noise.
After I reinstalled the chain tensioner(I had a zip tie around it to keep everything in place) it pretty much adjusted itself after I removed the zip tie.
Now, I'm hearing noise again! It's driving my nucking futs! Could it be that there's too much tension on the primary chain or could it possibly be that the compensator sprocket is just a POS? Is there a way to tell if there's too much tension on the chain?
BTW - My bike is an '07 EG UC.
Thank you guys!
Last edited by ElectraJim; 11-29-2016 at 02:24 PM.
#2
I had similar problems with my 07 Fatboy. The stock compensator was a POS. Lots of banging/clunking on start up. I also had the factory auto chain tensioner which did not work well. I kept hearing a rattling sound on acceleration. When I opened it up, the primary chain was so loose it had carved a groove into the cover! I replaced the stock compensator with an SE version. I also put in a Hayden chain tensioner. No problems since-have close to 50k on the bike now...still running strong.
The following users liked this post:
ElectraJim (11-29-2016)
#3
'07 FLHR, same experience with the stock tensioner, got stuck and the chain was so loose it was wearing the cover.
Switched to the Hayden, too tight. It killed the clutch hub bearing which stripped the spline on the hub.
Using the Baker now, nice and quiet and smooth, won't look back now.
Switched to the Hayden, too tight. It killed the clutch hub bearing which stripped the spline on the hub.
Using the Baker now, nice and quiet and smooth, won't look back now.
The following users liked this post:
ElectraJim (11-29-2016)
The following users liked this post:
ElectraJim (11-30-2016)
#5
The following users liked this post:
ElectraJim (11-30-2016)
#6
The following users liked this post:
ElectraJim (11-30-2016)
#7
Maybe the noise I am hearing isn't chain related. It sounds to me like the chain tension is too tight.
Well, since I'm not riding it right now, I'm going back to plan B and saving up for a Baker compensator. Think I'll save a little more and get the attitude adjuster as well.
Oh well, what's another $700 bucks? :::sigh:::
Well, since I'm not riding it right now, I'm going back to plan B and saving up for a Baker compensator. Think I'll save a little more and get the attitude adjuster as well.
Oh well, what's another $700 bucks? :::sigh:::
Trending Topics
#8
Chain Tensioner
We at securecaps.com have found the hayden to work well since it has the spacers for right tension. No removal of any parts except the oem. tensioner.
also S&S makes one and Baker.
We are running the new hayden with the right spacers and tension and its awesome. hope that helps
also S&S makes one and Baker.
We are running the new hayden with the right spacers and tension and its awesome. hope that helps
The following users liked this post:
ElectraJim (11-30-2016)
#9
Take the derby cover off (with bike on a lift or table, oil will run out otherwise) and using a long thin screwdriver or rod of some sort and a flashlight, look in and push against the center of the upper part of the chain and see if it has some flex. If very little flex and under tension then its too tight.
The following users liked this post:
ElectraJim (12-01-2016)
#10
Take the derby cover off (with bike on a lift or table, oil will run out otherwise) and using a long thin screwdriver or rod of some sort and a flashlight, look in and push against the center of the upper part of the chain and see if it has some flex. If very little flex and under tension then its too tight.